NN-16SB6 type3
Turning + Cross + Front-face + Back
| Tool Name | Size | Equipment |
|---|---|---|
| OD tool (Tool Holder) | 口12.7X5(130mm max.) | Standard(*) |
| ID tool | ER11 x 4 (Double drill holder) | Standard |
| ER16 x3 (Double drill holder | Option | |
| Live tool | ER11 x 3 | Standard |
| ER16 x 3 | Option | |
| ER11 x 4 | Option(*) | |
| ER16 x 4 | Option(*) |
(*)In case that you choose 4 Live tool，the maximum number of OD tool (Tool Holder) is 4.
Specification Item
| Specification Item | type3 | |
|---|---|---|
| Max.Machining Capacity | Machining diameter | φ16mm |
| Machining length | Fixed Bush(160mm) Rotary Bush(110mm) | |
| Max. Parts unloading length | 80mm | |
| Main spindle | Main spindle through-hole diameter | φ17mm |
| Main spindle RPM ($1) | 300～10,000 r.p.m（～8000r.p.m Rotary Bush） | |
| Main spindle RPM ($2) | 200~7000r.p.m | |
| Max. back spindle chuck diameter | φ16mm | |
| Max. no. of tools (as standard) | 16 | |
| $1 | OD tool（□12.7×130mm Max） | 5 |
| Frontal hole ER11（※1） | 4 | |
| Live tool ER11(as standard) | 3 | |
| Max frontaldrill diameter | φ7mm | |
| Max. frontal drill length | 30mm | |
| Max.frontal tap diameter | M6 | |
| Max. live tool spindle drill diameter | φ7mm | |
| Max.live tool spindle tap diameter | M5 | |
| Live main tool spindle | 200～8,000r.p.m | |
| $2 | Frontal hole ER11 | 4 |
| Max. frontal drill diameter | φ6mm | |
| Max.frontal tap diameter | M5 | |
| Rapid feed speed rate | 24m/min. | |
| Min. command unit | 0.0001mm | |
| Main spindle C-axis min. command unit（$1,$2） | 0.001° | |
| Motor | Main spindle motor | 2.2kW(Both use for C1) |
| Live tool motor | 0.4kW | |
| Back main spindle motor | 0.75kW(Both use for C2) | |
| Axis feed motor X1、Y1、Z1、Z2 | 0.5kW | |
| Coolant pump | 0.25kW | |
| Lubricant pump | 0.003kW | |
| Hydraulic pump | 0.75kW | |
| Dimensions and Others | Main spindle center height | 1000mm |
| Input power capacity | 7.1kVA | |
| Pneumatic pressure & flow rate | 0.6MPa/40L | |
| Coolant tank | 70L | |
| Lubricant tank | 0.8L | |
| W×D×H | 1945×980×1655 | |
| Weight（incl. options） | 1.7t | |
| NC Standard Function | MITSUBISHI NC | M70A |
| NC display (8.4 color TFT LCD) | ||
| Machining program memory capacity 230KB (600m) | ||
| Number of tool off-set correction(80 pairs) | ||
| Background programming editing function | ||
| Main spindle C-axis function ($1$2 C-axis of the simple belt) | ||
| User macro function | ||
| Tool nose wear compensation | ||
| Corner chamfering/Corner rounding | ||
| Fixed cycle | ||
| Complex fixed cycle | ||
| geometric commands | ||
| Oeration manual | ||
| Serial In/Output interface | ||
| CF Card interface | ||
Standard Accessores
| Frontal drill attachment (ID tool unit) | φ17（ER11） |
| Tool holder（OD tool） | □12.7 |
| Chuck sleeve | P16 |
| Chuck spring | P16 |
| Spindle cap | P16 |
| Working light（High luminous LED) | |
| Automatic lubricator | |
| Parts catcher | |
| Parts box | |
| Cut-off tool breakage | |
| Automatic power interception | |
| Coolant cut-off detector | |
| Main spindle overlord detector | |
| Door safety interlock | |
| Leveling pads |
Optional Accessories
| 3 Live tool unit | ER16 |
4 Live tool unit |
ER16 |
| 4 Live tool unit | ER11 |
| Synchronous rotary guide bush | |
| Synchronous rotary guide bush drive unit | |
| Tool for synchronous rotary guide bush | |
| Fixed guide bush | |
| Tool presetter 10 | |
| Spindle tube liner for small parts | Rotary type |
| Drill holder | φ22Doudle(With NA nut) |
| Tap holder | φ22Doudle(With NA nut) |
| Tap breakage detector | φ17/φ22 |
| Back tool unit | φ17/φ22 |
| Parts support device | type1/type2 |
| Parts conveyor | type3 |
| Signal warning light | 3-Stage |
| MITSUBISHI NC manual | CD-ROM/Book |
| Working tool set |
(*1)type1/2 Single drill holder
type3 Double drill holder
| $1 | $2 | ||
|---|---|---|---|
| Turning | Cross drill | Back main spindle | |
| type3 | ○ | ○ | ○ |
- Note:
- The specification based on the specifications applied within Japan. Specifications are subject to change without notice.
- This product could be classified as strategic item or other export regulated under the Foreign Exchange and Foreign Trade Law.Contact our sales representative when exporting this product.
- The above-menlioned machine capabilily is for the case when work material is SUS303.
Depending on the processing condition such as the qualily of work material and the tools to be used，machine capabilities values may differ from the above-mentioned values.
