NN-16SB7
Latest model of the best-selling series SB
- Back X axis for over lapping work and back-only tool post equipped.
- Round form exludes projection as much as possible
-
- Main-Side Tool
Slanted tool post allows smooth chip discharging. The dovetail struture ensures high rigidness. The dovetail structure with hand scraping same as tool post support front face drilling unit. Hydraulic drive system.
Tools STANDARD OPTION Main
SideOD Tool □12.7mm×5 7 ID Tool ER11(φ7)×4 ER16(φ10)×3 Gang rotary tool ER11(φ7)×3 ER11(φ7)×4
ER16(φ10)×3 or 4
- SubーSide Tool
Back-only tool post offers shorter cycle time and versatile machining variation.
Optional slotting tool enables back slitting process machiningTools STANDARD OPTION Sub
SideID Tool ER16(φ10)×2 - Gang rotary tool ER16(φ10)×2 Slottiong Tool
- Opening for machining area
Improvement of operability by larger opening.
When you open R-door, it does not bulge outside, as is stored in the cover.
This prevents coolant oil leakage.Door safely stops at full-open position with its weight.
- device
NC M70V(Mitsubishi).
USB interfface available in addition to CF card interface.
Movable operation panel improves operability.
- NOMURA-ism
-
All Nomura products adopt dovetail
structure tool post.Hand scraping method applied to make heavy tool post move smoothly by sliding guidance trapezoid surface contact.
As technique to support the dovetail structure, scraping procedure is operated by skilled craftsmen
Integrated casting bed
Integrated casting bed absorb vibration and support heavy tool post
SPECIFICATION
| Specifications | NN-16SB7 | Remarks | |
|---|---|---|---|
| Machining Capacity | Max.Machining diameter | φ16mm | |
| Max.Machining length | 160mm/1 | fixed type guide bush using | |
| Max.Machining length | 110mm/1 | rotary type guide bush using | |
| Parts pick-up length | 80mm | ||
| Main Spindle | Main spindle through-hole dia. | φ17mm | |
| Main/Sub spindle RPM | Main-Side 10000rpm max. Sub-Side 7000rpm max. |
||
| Back spindle chucking diameter | φ16mm | ||
| Max.Number of Tools | 20 | option using | |
| Main-Side | OD Tool | 5 □12.7mm×5 |
toolholder specifications |
| ID Tool | 4 ER11(φ7)×4 |
drill sleeve OD. φ16mm | |
| Gang rotary tool | 3 ER11(φ7)×3 |
||
| Max. frontal drill dia. | φ7mm | ||
| Max. frontal drill length | 30mm | ||
| Max. frontal tap dia. | M6 | ||
| Main live tool spindle drill dia. | φ6mm | ||
| Main live tool spindle tap dia. | M5 | ||
| Main live tool spindle speed | 8000rpm max. | ||
| Sub-Side | ID Tool | 2 ER16(φ10)×2 |
Only Sub-Side |
| Gang rotary tool | 2 ER16(φ10)×2 |
Only Sub-Side | |
| Front & off-center Max. frontal drill dia. | φ8mm/φ6mm | ||
| Front & off-center Max. frontal tap dia. | M6/M5 | ||
| NC command | Feed Rate | 24m/min | (X1. 13m/min) |
| Min. unit | 0.0001mm | ||
| Main/Back spindle C-axis | 0.0001° | ||
| Motor | Main spindle | 1.5/2.2kW | |
| Back spindle | 0.3/0.75kW | ||
| Main/Sub tool spindle drive | 0.4kW | ||
| X1/Y1/Z1/X2/Z2 | 0.5kW | ||
| Coolant pump | 0.25kW | ||
| Hydraulic pump | 0.75kW | ||
| Dimensions and others | Main Spindle Height | 1000mm | |
| Input power capacity | 10kVA | ||
| Pneumatic pressure ＆ flow rate | 0.6MPa、50L/min | ||
| Coolant tank capacity | 100ℓ | ||
| Hydraulic tank capacity | 10ℓ | ||
| Lubricant tank capacity | 0.8ℓ | ||
| W×D×H | 1990×1000×1635mm | ||
| Weight | 1900kg | ||
| NC Standard Function | NC unit | MITSUBISHI M70V typeA | USB connector with |
| NC Display | 8.4"COLOR TFT | ||
| Program storage capacity | 500KB[1280m] | ||
| Number of tool off-set correction | 40 |
STANDARD ACCESSORIES
- NOMURA-ism Dovetail Structure＆Hand Scraping
- NOMURA-ism (Hydraulically driven FRONTAL DRILL ATT × 4 (ER11)
- NOMURA-ism (Integrated casting bed)
- SYNCHRONOUS ROTARY GUIDE BUSH16
- Main-Side LIVE TOOL UNIT × 3 (ER11)
- Sub-Side LIVE TOOL UNIT × 3 (ER16)
- TOOL HOLDER 12.7mm × 5
- DRILL HOLDER φ16× 4
- $9CHUCK SLEEVE P16
- $12 CHUCK SLEEVE P1
- SAFETY DEVICE
- PARTS CATCHER(Sub-Side)
- WORKING LIGHT
- WORKING TOOL SET/LEVELING PAD
OPTION ACCESSORIES
- FIXED GUIDE BUSH UNIT16
- FIXED BUSH HOLDER BH16-P10,8,6
- TOOL PRESETTER WITH MICROSCOPE
- MANUAL PULSE GENERATOR 37P
- SIGNAL WARNING LIGHT 3-STAGE
- PARTS CONVEYOR (W/Parts receiver and basket)
- Note
- The above-mentioned machine capability is for the case when work material is SUS303.
Depending on the processing condition such as the quality of work material and the tools to be used，
machine capabilities values may differ from the above-mentioned values. - The specification based on the specification applied within Japan.
Specifications are subject to change without notice. - This product could be classified as strategic item or other export regulated under the
Foreign Exchange and Foreign Trade Law.
Contact our sales representative when exporting this product.
